Canada Passport Photo Maker

50x70 mm. The taller IRCC frame.

Canada breaks the pattern. Where most countries ask for the 35 by 45 millimeter standard, the Canadian passport uses a taller frame, 50 by 70 millimeters, and the same photo that works in almost every other country’s application comes out wrong here, face too small, too much sky, or too much shoulder. This tool opens with the Canadian frame already set, 591 by 827 pixels at 300 DPI, so the composition problem is solved by the starting point.

Canada passport photo size: 50×70 mm

The frame measures 50 millimeters wide by 70 millimeters tall. At print resolution, 300 DPI, that is 591 by 827 pixels. The proportions are the important part: a 35×45 photo stretched into 50×70 looks visibly soft and slightly distorted, while a 50×70 crop from a good original is sharp and correctly proportioned. The tool crops the edges to fill the frame and lets you center the face, so the output is the right shape from a real original, not a rescaled smaller photo.

Spec Requirement
Photo size 50 x 70 mm
Inches 1.97 x 2.76 in
Pixels at 300 DPI 591 x 827 px
Background Plain white
Head size 31-36 mm from chin to crown
Glasses Not allowed
Headwear Only religious, face outline visible

What IRCC expects

The head, from chin to the top of the head, should measure between 31 and 36 millimeters of the 70 millimeter height, which keeps the face large but not pressed against the top edge. The background is plain white, evenly lit, with no shadow or pattern. The expression is neutral, both eyes open and visible, no glasses, and headwear is allowed only when worn for religious reasons, with the face outline fully visible. The photo must be recent, a current likeness, and it must be unretouched.

How to use the tool

Choose an original with enough resolution, a phone camera from the last year or two is usually plenty. The frame is already 591 by 827 pixels, so drag the image until the face sits centered in the band, process, and download. For a paper application, print the result at 50×70 on good photo paper; for the online one, upload the same JPG and let the portal apply its own file-size gate, because the composition is what travels with the file.

The two classic Canada mistakes

The first is using a 35×45 photo scaled up, which produces a soft face and a slightly wrong proportion. The second is composing for the shorter frame, so the face sits too high in the taller one and the shoulders get cropped. Both disappear when the photo is composed inside the actual 50×70 frame from the start, which is the job this tool does for you before any printing or uploading happens.

Frequently asked questions

Why can I not use a standard 35 by 45 photo?

n

Canada’s frame is 50 by 70 millimeters, taller and wider than the world standard. A 35 by 45 photo is the wrong shape on a Canadian form, and the face comes out too small inside the taller frame.

n

What are the pixel dimensions?

n

591 by 827 pixels at 300 DPI prints to exactly 50 by 70 millimeters, and that is the frame this tool opens with, so the composition starts correct instead of being cropped into shape later.

n

Where should the face sit?

n

The head, crown to chin, fills a middle band of about 31 to 36 millimeters of the 70 millimeter height, centered horizontally. Composing inside the real frame from the start removes the classic Canadian mistake of a face that drifts high.

n

Does IRCC accept a digital upload?

n

Yes. The online application takes a digital photo in the same 50 by 70 frame. Use the file this tool outputs directly, without a second resize pass.

n

What background should I use?

n

A plain, light background with no shadow or pattern. An even off-white is acceptable; gradients and visible room edges are not.

n

ADVERTISEMENT
ADVERTISEMENT