A passport photo in Pakistan is small, and the small is where applications fall apart. The face is a touch too high, the background shows a corner of the room, or the file for the online form is 200 KB when the portal accepts 60. The dimensions themselves are not the problem, the frame is a well-known 35 by 45 millimeters, but most phone photos do not arrive in that shape. This tool starts from the exact frame, 413 by 531 pixels at 300 DPI, and composes your photo inside it.
Pakistan passport photo size: 35×45 mm
The frame measures 35 millimeters wide by 45 millimeters tall, the standard ICAO biometric size used for the passport, the visa, and the national ID family. At print resolution that is 413 by 531 pixels. The tool loads that frame by default, so the moment you process a photo the output is the right proportion: the face centered, the shoulders below, and the crown clear of the top edge. Nothing is stretched, only the edges are cropped.
| Spec | Requirement |
|---|---|
| Photo size | 35 x 45 mm |
| Inches | 1.38 x 1.77 in |
| Pixels at 300 DPI | 413 x 531 px |
| Background | Plain white |
| Head size | 29-34 mm from chin to crown (70-80%) |
| Copies | Two identical photos for paper |
| NADRA digital | JPG, max 60 KB, min about 350 x 467 px |
What NADRA checks
From chin to crown the head should measure around 29 to 34 millimeters, which lands the face at 70 to 80 percent of the 45 mm height. The background must be plain white, with no shadow, pattern, or object, and the eyes must be open, visible, and free of hair. The photo should be recent, within about six months, and taken in even light so the skin tones look natural. Two copies are the usual requirement for a paper application, both taken from the same original.
How to use the tool
Drop in any photo, a phone shot is fine if the face is sharp. The frame is already 413 by 531 pixels, so drag the image until the face sits centered with the crown clear of the top, then process and download. The result is a JPG at the full frame size. For a paper application, print two copies on matte or gloss photo paper and cut to the edge; for the online form, keep the same file and run it through a compressor if the portal’s KB limit is lower than your file.
Digital submission sizes
The online NADRA forms accept a JPG with a ceiling around 60 KB and want the same 35×45 composition, commonly at a minimum near 350 by 467 pixels. The composition this tool produces is the same at any resolution, so you can shrink the file for the portal without recomposing. If the portal complains about size rather than shape, the problem is weight, not dimensions, and a pass through a KB-targeted compressor fixes that.
Why photos get sent back
Three reasons cover most returns: the head is too small in the frame, the background is not clean, and the digital file is over the limit. The first two are composition problems, and the fixed frame here makes them visible before you print. The third is a file-size problem, which is a separate tool’s job. Handle both and the photo stops being the reason the application waits.
Frequently asked questions
What file size does the NADRA online form accept?
60 KB is the portal ceiling for the card photo. This tool produces the correct shape, and if the download weighs more than 60 KB, run it through an image compressor with a 60 KB target before uploading. The shape must not change, only the weight.
Is the Pakistani frame the same as other countries?
The 35 by 45 millimeter frame is shared with India, the UK, Australia, and most of the rest of the world. The exceptions are the US, which uses a 2 by 2 inch square, and Canada, which uses 50 by 70 millimeters. Do not reuse a photo framed for a different rule.
White background or off-white?
A clean, plain, light background with no pattern, shadow, or border. A warm white wall reads as off-white in print and is a common sent-back reason, so shoot against a bright, even surface.
Can I use this photo for an NTS form or a visa?
No. Each requirement has its own frame and file ceiling: NTS portals want the photo under 50 KB, and the UAE visa uses 43 by 55 millimeters. One photo per requirement, each made from its own frame.
What size do I ask a photo studio to print?
35 by 45 millimeters, the standard passport size in Pakistan. If you bring your own file, hand the studio the exact output of this tool with no further editing, so the print matches the digital copy.