US Passport Photo Maker

2x2 inches. 600x600 px, the State Department square.

If you have printed passport photos anywhere else in the world and then tried one in the United States, you know the surprise: the American standard is a square, not the tall rectangle used almost everywhere else. Two inches by two inches, 600 by 600 pixels at print resolution, with the face occupying a defined band of the square. Most phone photos are rectangular, so a plain crop gives you a face that is too small and too low. This tool starts from the correct square and composes the photo inside it.

US passport photo size: 2×2 inches

The frame is two inches on each side. At 300 DPI, the resolution a printer expects, that is 600 by 600 pixels, and the State Department asks for at least that size for digital files. The tool opens at exactly those numbers. When you drop in a rectangular photo, the square is filled by cropping the left and right edges, and you center the face with a drag. No stretching happens, so proportions stay true.

Spec Requirement
Photo size 2 x 2 inches (square)
Millimeters 50.8 x 50.8 mm
Pixels at 300 DPI 600 x 600 px
Background White or off-white
Head size 25-35 mm (1 to 1 3/8 in)
Recency Within the last 6 months
Glasses Not allowed

What the State Department checks

The head, measured from chin to the top of the hair, must be between 25 and 35 millimeters, roughly one to one and three-eighths inches, of the two-inch frame. The background must be white or off-white, with no shadow and no texture. The expression is neutral, mouth closed, both eyes open and visible, and glasses come off for the photo. The picture must be recent, taken within the last six months, and it must show your current appearance.

How to use the tool

Upload any photo where the face is sharp and roughly centered. The 600 by 600 square is already set, so you drag the image until the face sits in the center band, crown clear of the top edge, then process and download. The output is a JPG at the full square. Print it on photo paper for the paper application, or keep the digital file for the online form, which accepts the same square at 600 by 600 or larger.

Why applications bounce

The three classic bounces: a smile instead of a neutral face, glasses in the frame, and a background that is not a clean light color. All of them are visible in the preview here before you spend money on printing. The square also has its own failure mode, the face drifting low because the rectangular original had sky at the top, which is exactly the drift the centered crop in this tool prevents. Check the face band, check the background, and the photo passes its part of the application.

Frequently asked questions

Why is the US photo a square?

n

The US standard has always been 2 by 2 inches, while nearly every other country uses the 35 by 45 millimeter rectangle. A photo framed for any other country therefore does not fit, and a naive crop of a rectangular phone photo leaves the face too small.

n

What are the exact pixel dimensions?

n

600 by 600 pixels, which prints to exactly 2 by 2 inches at 300 DPI. The same file serves both the digital upload and the printed copies.

n

Where should the face sit in the square?

n

In the middle band: the published rule puts the face height, chin to crown, between 1 and 1 3/8 inches of the 2-inch height. A rectangular original with sky at the top drifts the face low, which is the failure mode the centered composition here prevents.

n

Color or black and white?

n

Color, and recent. The State Department asks for a current color image, so a black and white print or a photo from a previous application cycle is a bounce waiting to happen.

n

Do I make two different files, one for upload and one for print?

n

No. The single 600 by 600 file covers both. Print at 2 by 2 inches from it, and upload the same file where the form asks for a digital photo.

n

ADVERTISEMENT
ADVERTISEMENT