Make any beep, buzz, or tone in your browser. Pick a frequency from 20 Hz to 20,000 Hz, choose a wave shape, and press Start tone. No app, no upload, no sign-up.
It runs entirely on your device with the Web Audio API, so nothing you set is ever sent anywhere.
How to Use the Tone Generator
- Enter a frequency in Hz, or tap a quick preset: A4 440, 1 kHz, 31 Hz, or 8 kHz.
- Choose the wave from the dropdown: sine, square, sawtooth, or triangle.
- Set the volume slider, then press Start tone.
- Press Stop any time. Volume and wave can be changed while it plays.
The frequency field is clamped to 20-20,000 Hz, so there is nothing to break by typing a wrong number.
Common Frequencies and What They Are For
| Frequency | Sound | Common use |
|---|---|---|
| 31 Hz | Deep rumble | Sub-bass reference (the 31 Hz preset) |
| 100 Hz | Low thump | Bass speaker check |
| 440 Hz | Clear note | Instrument tuning (note A) |
| 1,000 Hz | Standard beep | Audio equipment test tone |
| 4,000 Hz | High ring | Phone ringer range check |
| 8,000 Hz | Sharp high | Detail and driver edge check |
| 16,500 Hz | High squeal | Phone speaker cleaning |
| 18,000 Hz | Near-ultrasonic | Dog whistle range |
Humans hear roughly 20 Hz to 20,000 Hz. Most adults start losing the top end, usually above about 15 kHz, after age 30.
Which Wave Type Should You Pick?
- Sine — pure, smooth tone. Best for testing and cleaning.
- Square — buzzy, harsh tone. Good for noticing distortion.
- Sawtooth — rough, electric tone. Sounds like an old alarm.
- Triangle — soft buzz. In between sine and square.
If a speaker distorts or cracks, play the same frequency as both a sine and a square wave. Sine clean plus square harsh usually means the driver is weak but still working.
Can I Use This to Test My Phone or Laptop Speaker?
Yes. Start with the 1 kHz preset — if you hear it, the speaker works. Then type 100 Hz for bass and 10,000 Hz for treble.
- No sound at 1 kHz — speaker broken or muted. Check volume and mute first.
- Sound is muffled — the mesh is dirty. A 16,500 Hz pass for 20 to 30 seconds at medium volume can shake out dust and dried water, and the water out of speaker tool is built around that job.
- Only one side plays — that is a channel problem the speaker LR test can pin down.
What Is the Best Frequency to Clean a Phone Speaker?
16,500 Hz is the popular choice. It is high enough to make the diaphragm move fast, which shakes loose dust and dried water.
- Type 16500, sine wave, medium volume.
- Play for 20 to 30 seconds, phone a few inches from your face.
- Stop. Do not run it at max volume — that stresses the driver.
For a deeper clean, follow with a short 4,000 Hz burst.
Can I Make a Dog Whistle Sound Online?
Yes. Dogs hear up to about 45,000 Hz, far above humans. Set the tone to 18,000 to 22,000 Hz and play it. Most phone speakers cut off around 18 to 20 kHz, so the sound may be quiet or fade.
- Lower volume is fine — dogs hear quiet high tones well.
- If your phone makes no sound at 20 kHz, that is a normal driver limit, not a bug.
- A real dog whistle (23 to 25 kHz) needs hardware with full range.
Tone Generator in Pakistan and the UAE
Phone shops in Pakistan use it for speaker checks and instrument tuning before a customer buys audio gear, and it costs the shop nothing. In the UAE, offices, schools, and event planners use it for mic checks and sound system walks.
Because it runs locally in the browser, it is also safe where network policy blocks downloads.
Related Audio Tools
- Frequency sweep test — one continuous pass over the whole range
- Sub bass test — fixed low tones from 20 to 60 Hz
- Mic test — check the input side
- All audio tools in one place
Frequently asked questions
Is the tone generator free?
Yes. 100% free, unlimited use, no account needed.
Which frequency should I test my speaker with?
Start at 1,000 Hz. Add 100 Hz for bass and 10,000 Hz for treble for a fuller check.
Can loud tones damage my speaker?
Yes, at max volume for a long time — especially low frequencies like 50 to 100 Hz. Keep the volume moderate.
Why is there no sound at 20,000 Hz?
Most phone and laptop drivers cut off around 18 to 20 kHz. That is a hardware limit of the driver.
Does it work on mobile?
Yes. Chrome and Safari on Android and iOS both work, using the phone’s own speaker or your earphones.
Last updated: 31 October 2026.